HT-3123PTN weighing control instrument

HT-3123PTN weighing control instrument features:
1.100M Industrial Ethernet interface (support MODBUS-TCP communication);
2. Option interface: 8-channel input/12-channel output option board, PROFIBUS-DP option board, 100Hz PROFIBUS communication speed, 4-20mA analog output option board, dual-speed control preset points, automatic correction of advance Function, 200Hz comparison speed, upper limit and lower limit auxiliary comparator output, zero tolerance auxiliary comparator output;
3. 8 independent multi-function comparators;
4. Power-on reset, keyboard reset and automatic zero tracking functions;
5. Keyboard peeling and digital peeling functions;
6. Tare internal lock function;
7. Automatic peeling, automatic clearing function;
8. Dynamic detection function;
9. Keyboard lock function;
10. MODBUS, PROFIBUS remote control input and output functions;
11. Two-point calibration and weight-free calibration. The scale function;
12. Calibration parameter viewing and manual input recovery function;
13. Remote calibration function;
14. Interface maintenance and self-diagnosis function;
15. Panel type IP65 protection, dust-proof IP69K protection;
16. Flameproof type: IP65 protection, Exd IIB T6;
HT-3123PTN technical parameters
Sensor excitation voltage DC +5V
Input signal range 0～20mV, support 2mv/V and 3mv/V sensors
Display division 150000
Resolution 1uV/e, 0.1uV/d
Weight update rate 200Hz
SPAN input signal range ≤20mV
Zero input signal range ≥0.1mV
Working temperature -10℃～40℃
Relative humidity ＜95%
Storage temperature -40℃～60℃
Drive capacity 1～8 350Ω sensors
The load cell connection method adopts 6-wire system, long-wire automatic compensation
Power supply: AC 85～264VAC 49～61Hz
Display 7-digit green LED segment code display