MTB load cells are used in:It is mainly used to control the weighing of ingredients in packaging scales, belt scales and chemical, pharmaceutical, food and other industries.The main features of MTB load cell:The MTB load cell is made of stainless stee…

Features:1. Low installation height2. Self-stabilizing structure3. Good long-term stability4. High-quality alloy steel with nickel plating on the surface5. Protection grade IP676. It is suitable for weighing control of various ingredients such as grou…

1. The mounting surface of the base of the sensor should be flat and clean, without any oil film, glue film, etc. The mounting base itself should have sufficient strength and rigidity, which is generally required to be higher than the strength and rig…

What are the classifications of weighing instruments?Classified by application: trade, process controlClassified by application environment: ordinary type, wet type, riot typeClassified by connected sensor: analog, digitalOf course, there are some ot…

Weight transmitter is a kind of special instrument that can convert weight signal into standard analog signal or digital signal, which is developed and designed according to the need for on-site weight transmission in the industrial control field. The…

HT-FW/FWC weighing module installation requirements:1.The flatness of the installation foundation of each weighing module should be within 0.3mm.2.The foundation of each module should be in the same horizontal plane, and the plane requirement is betwe…

On the scale body where the weighing module is installed, if the scale body may be subject to an objects impact (at this time, the weighing will change suddenly), this situation should be considered when selecting the sensor capacity. The heavy weight…

The installation method of static load module should pay attention to the following three points: static load weighing module1. Choose a fixed module, a semi-floating module and one or two floating modules when installing the static load weighing modu…

Types of static load weighing modules:The dimensions of the top and bottom plates of each static load weighing module are the same. But there are three ways to connect the top plate and the sensor. As shown below:Fixed module:The sensor and the top pl…

Weighing modules can be divided into dynamic load weighing modules and static load weighing modules.The static load module is suitable for occasions with small horizontal impact (as shown in the figure). The dynamic load module is suitable for occasio…

Weighing module picture:The function of the weighing module:Weighing module, suitable for retrofitting existing equipment. Whether it is a container, a hopper, or a reactor, plus a weighing module, it can become a weighing system.The main function of …

The concrete batching plant uses an automatic batching system with sensors, which greatly improves the concrete batching accuracy and production speed. Therefore, the correct selection of load cells has become the key to improving the accuracy, stabil…