Hello, welcome to visit Changzhou Hengtuo Electronic Weighing Apparatus Co., Ltd. official website!
| CH
Hotline:
400-004-0519
Location: Home > News > Industry News
News
Hotline:
400-004-0519

Weight sensor installation attention

Sources: | Date: 2018-12-11 09:33:24 | Browse:37447

Abstract:

The weight sensor should be handled with care, especially the small-capacity sensor made of alloy aluminum elastomer. Any impact or drop may cause great damage to its measurement performance. For large-capacity resistance strain type weight sensors, g…

The weight sensor should be handled with care, especially the small-capacity sensor made of alloy aluminum elastomer. Any impact or drop may cause great damage to its measurement performance. For large-capacity resistance strain type weight sensors, generally speaking, it has a relatively large dead weight, so it is required to use appropriate lifting equipment (such as chain hoists, electric hoists, etc.) when handling and installing.

The mounting surface of the base where the sensor is installed should be flat and clean, without any oil film, glue film, etc. The mounting base itself should have sufficient strength and rigidity, which is generally required to be higher than the strength and rigidity of the sensor itself.


Relevant articles
Related products

Copyright 2020 Changzhou Hengtuo Electronic Weighing Apparatus Co., Ltd. All rights reserved.Support: Eastnet | [Manage]
Top