Dry-mixed mortar storage tank weighing system

Dry-mixed mortar is currently our new type of environmentally friendly building material, and its superior product performance has been widely recognized. Compared with traditional building materials and construction methods, it is a revolutionary change. It will surely make a qualitative leap in the building and use effect of our country.

Dry-mixed mortar is produced according to different purposes, from a variety of materials, according to different formulas and corresponding process methods. Among them, accurate ingredients according to process requirements and the formula ratio of various materials are the key technology to ensure product quality and normal operation of the production line. Based on the introduction of foreign advanced technology, we have been studying the characteristics of various materials for a long time, and have accumulated a wealth of practical experience, which has solved the problem of rapid and accurate ingredients.

Key points of metering batching warehouse design:

On the premise of ensuring sufficient rigidity (especially the load cell installation and supporting parts), the weight of the metering and batching bin system should be as light as possible; its effective volume is 110-120% of the total volume of various formula materials; bin cone The angle is designed at an angle where the material with poor fluidity can slide down freely and smoothly. If the cone angle of the warehouse is designed to be too small, it is easy to cause the material in the warehouse to be dirty, and the meter display does not return to zero and cannot automatically enter the stop state of the next step, which will cause the automatic production line to be interrupted. For materials with very poor fluidity, several sets of one-way air nozzles can be set in the middle and lower parts of the silo to aid flow; flexible silo can also be used; in order to reduce frictional resistance and improve anti-corrosion ability, a convenient replacement can be designed Stainless steel lining; the connecting part of the metering and batching bin and the load cell should be equipped with height adjustment, limit, and pre-supporting devices; the three load cells must be symmetrically and evenly distributed to balance the force; the metering and batching bin is generally designed with a ring plate , One increases the rigidity, while placing calibration weights to facilitate calibration.